Preparing the battery for the car

Post Reply
simon
Posts: 5
Joined: Thu 13. Dec 2012 20:33

Preparing the battery for the car

Post by simon » Fri 14. Dec 2012 15:35

The car is getting the power from the battery, but not from the poles, + is from the top as normal, but - is from the side of the battery, therefore it is necessary to remove some of the plastic from the battery.

Use a sharp cutter/knife and cut approximate 10 mm from the bottom to remove the plastic.
Attachments
batterycut.jpg
batterycut.jpg (119.66 KiB) Viewed 3424 times

User avatar
Keld
Administrator
Posts: 409
Joined: Thu 13. Dec 2012 19:06
Location: Copenhagen, Denmark
Contact:

Re: Preparing the battery for the car

Post by Keld » Fri 21. Dec 2012 22:39

thx Simon, but I think a little bit more has to be removed, I had problems with some of them in the cars today, if you got time take ½cm more of each please.
/Keld

simon
Posts: 5
Joined: Thu 13. Dec 2012 20:33

Re: Preparing the battery for the car

Post by simon » Sat 22. Dec 2012 13:02

received a new bunch of batteries today

:x :cry: :twisted: :evil: 42,99 mm long
the old ones are 43,69 mm

same type Trustfire 10440

that gave a problem in some of the controllers, the battery fall out or it didn't work at all, now we has to fix the controllers to handle these or mark them for cars only, where there are no problem.

so fellow MAGracers, take notice if the batteries are same length. :!:

Merry X-mas lads

Post Reply