MAGracing Forum

Share your MAGracing with the rest of the world, get inspired and enjoy
It is currently Sun 20. May 2018 23:27

All times are UTC




Post new topic Reply to topic  [ 27 posts ]  Go to page 1, 2, 3  Next
Author Message
 Post subject: Building a car
PostPosted: Wed 22. Nov 2017 21:36 
Offline

Joined: Mon 13. Nov 2017 21:40
Posts: 23
While I wait for Helium frog's new cars I'm working on building a car but I need ideas for the missing pieces. I've ordered one of Ned's Shapeways chassis and I can use 1/32nd slot car parts for wheels and gears. That leaves all the electronics and motor. Has anyone found substitutes for the circuit board? Are the motor specs known?

I have RC gear to experiment with but it's become difficult to buy brushed motor speed controls that are small enough. I can always use a servo for steering and just let the drive motor run slowly so I can run it a test track.

Nick


Top
 Profile  
 
 Post subject: Re: Building a car
PostPosted: Thu 23. Nov 2017 15:23 
Offline
User avatar

Joined: Thu 27. Dec 2012 14:59
Posts: 49
Location: Denmark
NFBrown wrote:
While I wait for Helium frog's new cars I'm working on building a car but I need ideas for the missing pieces. I've ordered one of Ned's Shapeways chassis and I can use 1/32nd slot car parts for wheels and gears. That leaves all the electronics and motor. Has anyone found substitutes for the circuit board? Are the motor specs known?

I have RC gear to experiment with but it's become difficult to buy brushed motor speed controls that are small enough. I can always use a servo for steering and just let the drive motor run slowly so I can run it a test track.

Nick


I have a post on my site with suggestions for electronics with Neds chassis. Some days ago I uploaded a video for it.
http://magracer.com/site/electronics-magracing-car-coil-steering/

_________________
Image
http://www.magdragster.com http://www.magracer.com https://www.instagram.com/magdragster/


Top
 Profile  
 
 Post subject: Re: Building a car
PostPosted: Thu 23. Nov 2017 17:07 
Offline

Joined: Mon 13. Nov 2017 21:40
Posts: 23
Thanks MagRacer, I thought I had looked everywhere for info. I'd looked at your site when I first discovered magracing but it was some time ago now.

Nick


Top
 Profile  
 
 Post subject: Re: Building a car
PostPosted: Sat 25. Nov 2017 18:37 
Offline
User avatar

Joined: Tue 7. Oct 2014 22:28
Posts: 72
@ Magracer
Check PM please

_________________
http://www.MagneticRacing.com

http://www.heliumfrog.com/index.html


Top
 Profile  
 
 Post subject: Re: Building a car
PostPosted: Mon 27. Nov 2017 10:44 
Offline
Administrator
User avatar

Joined: Thu 13. Dec 2012 19:06
Posts: 394
Location: Copenhagen, Denmark
With such a low price for a controller, i had prefered this instead of the old ones.

controller

speed controller

_________________
/Keld


Top
 Profile  
 
 Post subject: Re: Building a car
PostPosted: Mon 27. Nov 2017 18:37 
Offline

Joined: Mon 13. Nov 2017 21:40
Posts: 23
Can anyone tell me the resistance and wire gauge of the steering coil? If not I guess I'll try "that looks about right"

I have all the major pieces to build a car ordered, now it's time to find magnets and hardware.

Nick


Top
 Profile  
 
 Post subject: Re: Building a car
PostPosted: Sun 3. Dec 2017 20:18 
Offline
User avatar

Joined: Thu 27. Dec 2012 14:59
Posts: 49
Location: Denmark
NFBrown wrote:
Can anyone tell me the resistance and wire gauge of the steering coil? If not I guess I'll try "that looks about right"


I use 0.2mm wire. 97 OHM

_________________
Image
http://www.magdragster.com http://www.magracer.com https://www.instagram.com/magdragster/


Top
 Profile  
 
 Post subject: Re: Building a car
PostPosted: Tue 5. Dec 2017 01:18 
Offline

Joined: Mon 13. Nov 2017 21:40
Posts: 23
Thanks, Magracer. Now I can wind a steering coil that should work the first try. 0.2 mm works out to 32 gauge here in the U.S.

Nick


Top
 Profile  
 
 Post subject: Re: Building a car
PostPosted: Thu 4. Jan 2018 01:31 
Offline

Joined: Mon 13. Nov 2017 21:40
Posts: 23
My steering coil winding has not worked out. I've made three; number 32 wire comes out at about ten ohms and gets hot at 1.5 volts. The first number 38 wire coil wasn't very neatly done and I broke the wire before the form was full. A second carefully wound #38 coil measures 95 ohms and sort of moves the steering when supplied with 7-8 volts. I don't know what else to try.

So I'm working on a servo steering solution instead. Wish me luck.

Nick


Top
 Profile  
 
 Post subject: Re: Building a car
PostPosted: Fri 5. Jan 2018 16:19 
Offline

Joined: Fri 21. Dec 2012 17:37
Posts: 301
Attachment:
DSCF0368 (640x479).jpg
DSCF0368 (640x479).jpg [ 196.82 KiB | Viewed 1070 times ]
One thing for sure that you do find Nick with magracing steering is that everything is related and, once sorted, cannot easily be altered. So the coil for instance must have the correct wire diameter, the correct number of turns (plus or minus 10 say, and be the correct distance from the steering magnets. Change the steering magnets and you may need a different coil. Change the wire diameter in the track and you may need to change magnets, coil etc.
Like you, I am just beginning to play with servo steering and started a car yesterday. A magnet attached to the servo arm seemed very strong against the two on the track rod so I replaced these, as you can see, with a screw. This, being small in diameter, combined with a small 3mm dia.magnet seems to give a very positive drive and the screw is easily adjusted to vary the gap to the magnet which is probably what will be needed.
The car seems to push around the track ok so I am looking forward to getting it running.
No sure about the very small servo, the slightly larger Turningy one looks better quality and has the correct connector size.
My radio arrived yesterday. The rx is slightly smaller than I expected.
I discovered that there is a throttle reverse switch on the transmitter. I am wondering if it would be possible to use a model aircraft esc (i.e. without reverse) and use the reverse switch on the tx.
Hopefully I will soon find out.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 27 posts ]  Go to page 1, 2, 3  Next

All times are UTC


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group