Slot.it Ferrari 312 PB converted to MagRacer

Tips and tricks about building a car. painting it a making it run smooth.
Post Reply
Ned
Posts: 368
Joined: Sun 13. Apr 2014 01:02
Location: Sedona, AZ USA

Slot.it Ferrari 312 PB converted to MagRacer

Post by Ned »

Finally finished building a complete car using 2.4ghz RC gear. Used a Slot.it slot car kit and one of my CK8 chassis kits. Originally chassis would not go around a 9” radius corner. Had to remove material on both sides of frame between front wheels to allow guide arm to swing left and right far enough. This version of CK8 is no longer available at Shapeways. New version will be available in few days. It incorporates several changes which improve performance and simplifies construction. Wheelbase for this car is 2.75”.
Attachments
IMG_20180503_154711.jpg
IMG_20180503_154711.jpg (521.65 KiB) Viewed 6035 times
IMG_20180503_144850 (2).jpg
IMG_20180503_144850 (2).jpg (827.2 KiB) Viewed 6035 times
IMG_20180503_141457 (2).jpg
IMG_20180503_141457 (2).jpg (295.6 KiB) Viewed 6035 times
IMG_20180503_141337.jpg
IMG_20180503_141337.jpg (579.74 KiB) Viewed 6035 times
IMG_20180503_141258.jpg
IMG_20180503_141258.jpg (705.43 KiB) Viewed 6035 times
IMG_20180503_141146.jpg
IMG_20180503_141146.jpg (588.34 KiB) Viewed 6035 times
IMG_20180503_141111.jpg
IMG_20180503_141111.jpg (620.69 KiB) Viewed 6035 times
IMG_20180503_140657.jpg
IMG_20180503_140657.jpg (576.25 KiB) Viewed 6035 times
IMG_20180503_140751.jpg
IMG_20180503_140751.jpg (653.9 KiB) Viewed 6035 times
IMG_20180503_140606.jpg
IMG_20180503_140606.jpg (643.92 KiB) Viewed 6035 times
IMG_20180503_140546-R.jpg
IMG_20180503_140546-R.jpg (646.08 KiB) Viewed 6035 times
NFBrown
Posts: 36
Joined: Mon 13. Nov 2017 21:40
Location: Boise, Idaho, USA
Contact:

Re: Slot.it Ferrari 312 PB converted to MagRacer

Post by NFBrown »

I'm impressed, Ned. I never considered trying to keep the interior detail. I've been happy if all the electronics will fit inside a closed body.

Nick
Post Reply