Hello everybody !
I'm french and i will try to speak english correctly!
i would like to build a track for magracing in my garage! I inquired for slot racing but i didn't like the fact that it's not realist !
I think magracing concept is better than slot!
Before begining the construction i have few questions!
Which width for 3 lines race?
Can we make a bend in pin?
Which space its need between the 2 wires?
Which paint have to use on the covered in plaster ?
Could you post some pictures of various stages of your own constructions please?
Thanks !!
Could you answer to me in french please....... lol
Sylvain
New french guy
Re: New french guy
Hi Sylvain, Sorry but if I write in French, you would not understand it! The width between the lanes/wires needs to be about 90mm. I don't understand why you want
3 lanes. This is not slot racing and you cannot have 3 lanes and the correct racing line.
Our photo of our starter track shows a simple racing line design with the wire ready for plastering.
Not sure what you mean by 'bend the pin'?
There are many photos on the website but I will attach the starter track now.
Best wishes, Wes R
3 lanes. This is not slot racing and you cannot have 3 lanes and the correct racing line.
Our photo of our starter track shows a simple racing line design with the wire ready for plastering.
Not sure what you mean by 'bend the pin'?
There are many photos on the website but I will attach the starter track now.
Best wishes, Wes R
Re: New french guy
This photo can also be seen on our new Facebook page
-
- Posts: 29
- Joined: Mon 25. Nov 2013 12:48
- Location: Biscarrosse France
Re: New french guy
Hello wes!
Thanks for your answer!
I wanted to make 3 lines in the start straight line for more realist start race ! But i think i'm going to build a simply first track!
By "bend the pin", i ( google translator....) would say "hairpin" or 180 degrees turn!
But i read in this forum , minimum radius is 160mm . Is it true?
Which paint can i use on covered in plaster?
I'm going to draw a track !
Thanks for help me!
Good evening
Thanks for your answer!
I wanted to make 3 lines in the start straight line for more realist start race ! But i think i'm going to build a simply first track!
By "bend the pin", i ( google translator....) would say "hairpin" or 180 degrees turn!
But i read in this forum , minimum radius is 160mm . Is it true?
Which paint can i use on covered in plaster?
I'm going to draw a track !
Thanks for help me!
Good evening