Track building question
-
- Posts: 3
- Joined: Mon 19. May 2014 00:52
Track building question
When you plaster the track do you go over the wire?
Re: Track building question
Hello Maddog and welcome!
I use the wire as a hight for the tool.
Then, when yoy let it dry, use sandpaper! And get a topcoat of paint on the track.
I use the wire as a hight for the tool.
Then, when yoy let it dry, use sandpaper! And get a topcoat of paint on the track.
Re: Track building question
I had to check the website to see if we had missed something but the section on
plastering seems to cover it pretty well.
plastering seems to cover it pretty well.
Re: Track building question
Below is a close-up of a plastered track. As mentioned above and on the magracing website you should keep the track surface at the same height as the wires and as flat/level as possible.
-
- Posts: 3
- Joined: Mon 19. May 2014 00:52
Re: Track building question
Ok thank you for answering. I should be ordering my car and stuff soon! starting with a very very small oval to test my building skills.