Not tested yet. Still I think it will work.
Insert the clamp in front of the trigger by carefully pressing on the 'legs'.
Insert a 4mm bolt with Hex head and adjust the setting of the trigger.
MagRacing Autonomous Trigger clamp
MagRacing Autonomous Trigger clamp
- Attachments
-
- MagRacingAutoClamp.PNG (56.27 KiB) Viewed 14641 times
-
- magracing_autonomous_clamp.stl
- (9.56 KiB) Downloaded 1165 times
Racing Regards
Kim K.
Kim K.
Re: MagRacing Autonomous Trigger clamp
At last i got a test print from my new 3D printer.
Not at nice print BUT function wise it worked as expected.
Used a 3 mm bolt.
The spring tension made it stay an easy to insert or remove.
Adjusting also as expected.
Not at nice print BUT function wise it worked as expected.
Used a 3 mm bolt.
The spring tension made it stay an easy to insert or remove.
Adjusting also as expected.
- Attachments
-
- DSC_1475.JPG (99.79 KiB) Viewed 14580 times
Racing Regards
Kim K.
Kim K.