CH01-24-ReFb fully equiped, as neat as it gets ?

Tips and tricks about building a car. painting it a making it run smooth.
Post Reply
kiklo
Administrator
Posts: 485
Joined: Mon 9. Nov 2015 11:49
Location: Norway
Contact:

CH01-24-ReFb fully equiped, as neat as it gets ?

Post by kiklo »

Her is a internal view of a fully mounted CH01-24-ReFb ( my third option for the chassis ).

REar motor FrontBattery. with 2 options for placing the receiver ( for chassis from 100mm and larger.).
I found some servos have very short wires.

Also mounted is my lapcounter module and all the rest.

Any thoughts ?
IMG_20221115_114146.jpg
IMG_20221115_114146.jpg (66.88 KiB) Viewed 6330 times
Racing Regards

Kim K.
Ned
Posts: 368
Joined: Sun 13. Apr 2014 01:02
Location: Sedona, AZ USA

Re: CH01-24-ReFb fully equiped, as neat as it gets ?

Post by Ned »

What is the wheelbase of the chassis in the photo?
What is the distance between the front wheels, when measured from the outside of one to the outside of the other?
Is the wheelbase adjustable?
kiklo
Administrator
Posts: 485
Joined: Mon 9. Nov 2015 11:49
Location: Norway
Contact:

Re: CH01-24-ReFb fully equiped, as neat as it gets ?

Post by kiklo »

This is a105 mm WB. It is not adjustable, but I print them to spesific WB.
https://id4u.no/butikk#!/magracing-1-0x ... -wheelbase

Front wheel track with is 67mm. Based on 7mm broad wheels.
Rear wheel uses a 70mm axle. and with 13mm broad rears totals ca 77mm.
Racing Regards

Kim K.
Marius17
Posts: 2
Joined: Tue 22. Nov 2022 06:23

Re: CH01-24-ReFb fully equiped, as neat as it gets ?

Post by Marius17 »

Hello,

Very nice realization. I love the wheels in particular which are not the same size.
My website on this link https://www.mypornmotion.com/
kiklo
Administrator
Posts: 485
Joined: Mon 9. Nov 2015 11:49
Location: Norway
Contact:

Re: CH01-24-ReFb fully equiped, as neat as it gets ?

Post by kiklo »

I'm also testing some gimmics.

By printing the wheels 1st mm in 'alloy' collor theen white the disk looks nice. And printing the wheel-knucle in contrast color - woala - we got brake calipers at least on front wheels..
IMG_20221122_103448.jpg
IMG_20221122_103448.jpg (58.43 KiB) Viewed 6268 times
Racing Regards

Kim K.
User avatar
davidwp
Posts: 33
Joined: Fri 28. Dec 2012 03:38
Contact:

Re: CH01-24-ReFb fully equiped, as neat as it gets ?

Post by davidwp »

Super neat, Kim. It will be a big help in building the chassis I just received!
I am about to order the Tx/Rx you mentioned (as noted below) but haven't been able to determine what the best ESC would be for that receiver and the motor you included in my chassis order. What would you suggest?

Flysky FS-GT3C GT3C Transmitter Remote Control With GR3E Receiver For RC Car

Thanks,
David
kiklo
Administrator
Posts: 485
Joined: Mon 9. Nov 2015 11:49
Location: Norway
Contact:

Re: CH01-24-ReFb fully equiped, as neat as it gets ?

Post by kiklo »

viewtopic.php?t=792

Trying to keep answers thins in the right places.
Racing Regards

Kim K.
kiklo
Administrator
Posts: 485
Joined: Mon 9. Nov 2015 11:49
Location: Norway
Contact:

Re: CH01-24-ReFb fully equiped, as neat as it gets ?

Post by kiklo »

There we are.
IMG_20221124_140902.jpg
IMG_20221124_140902.jpg (80.22 KiB) Viewed 6237 times
Racing Regards

Kim K.
Post Reply