Her is a internal view of a fully mounted CH01-24-ReFb ( my third option for the chassis ).
REar motor FrontBattery. with 2 options for placing the receiver ( for chassis from 100mm and larger.).
I found some servos have very short wires.
Also mounted is my lapcounter module and all the rest.
Any thoughts ?
CH01-24-ReFb fully equiped, as neat as it gets ?
CH01-24-ReFb fully equiped, as neat as it gets ?
Racing Regards
Kim K.
Kim K.
Re: CH01-24-ReFb fully equiped, as neat as it gets ?
What is the wheelbase of the chassis in the photo?
What is the distance between the front wheels, when measured from the outside of one to the outside of the other?
Is the wheelbase adjustable?
What is the distance between the front wheels, when measured from the outside of one to the outside of the other?
Is the wheelbase adjustable?
Re: CH01-24-ReFb fully equiped, as neat as it gets ?
This is a105 mm WB. It is not adjustable, but I print them to spesific WB.
https://id4u.no/butikk#!/magracing-1-0x ... -wheelbase
Front wheel track with is 67mm. Based on 7mm broad wheels.
Rear wheel uses a 70mm axle. and with 13mm broad rears totals ca 77mm.
https://id4u.no/butikk#!/magracing-1-0x ... -wheelbase
Front wheel track with is 67mm. Based on 7mm broad wheels.
Rear wheel uses a 70mm axle. and with 13mm broad rears totals ca 77mm.
Racing Regards
Kim K.
Kim K.
Re: CH01-24-ReFb fully equiped, as neat as it gets ?
Hello,
Very nice realization. I love the wheels in particular which are not the same size.
Very nice realization. I love the wheels in particular which are not the same size.
My website on this link https://www.mypornmotion.com/
Re: CH01-24-ReFb fully equiped, as neat as it gets ?
I'm also testing some gimmics.
By printing the wheels 1st mm in 'alloy' collor theen white the disk looks nice. And printing the wheel-knucle in contrast color - woala - we got brake calipers at least on front wheels..
By printing the wheels 1st mm in 'alloy' collor theen white the disk looks nice. And printing the wheel-knucle in contrast color - woala - we got brake calipers at least on front wheels..
Racing Regards
Kim K.
Kim K.
Re: CH01-24-ReFb fully equiped, as neat as it gets ?
Super neat, Kim. It will be a big help in building the chassis I just received!
I am about to order the Tx/Rx you mentioned (as noted below) but haven't been able to determine what the best ESC would be for that receiver and the motor you included in my chassis order. What would you suggest?
Flysky FS-GT3C GT3C Transmitter Remote Control With GR3E Receiver For RC Car
Thanks,
David
I am about to order the Tx/Rx you mentioned (as noted below) but haven't been able to determine what the best ESC would be for that receiver and the motor you included in my chassis order. What would you suggest?
Flysky FS-GT3C GT3C Transmitter Remote Control With GR3E Receiver For RC Car
Thanks,
David
Re: CH01-24-ReFb fully equiped, as neat as it gets ?
Racing Regards
Kim K.
Kim K.