MAGracing Forum

bentley and audi are on the atlantik ocean

Beautiful cars Markus!
Would like to see how you modified the magracing chassis to fit the bodies.

i cut a 2mm plasticpiece in 40mmx30mm. than glued the bearings with 2k epoxid and the motor with normal glue on it. cut of the original rearaxleholder and glue the complete plate with axle and motor on it, in the lenght of the body. cut the frontwheels from inside to reduce the frontaxlewide. i needed only 1,5 to 2 mm so that the frontwheels can turn. on porsche and corvette i had to change the batteriemagnet on + pole from 5x5 to 5x3 and sanddown the sides of the chassie to reduce the wide a little bit. bearings axle and wheels are slot it parts.