Wes oploaded a video with tips for fitting the body on the chassis
but there are more tips to this, i added some magnets on top instead of weight, this fix the problem with holding the bodies in correct position until the glue is dry.
I also use contact glue instead of epoxy, its take a little bit longer but I am able to remove it again if needed.
and I also keep all magnet with the poles in the same direction, this give me the opportunity to switch bodies later, to this I use a big magnet to hold the magnets while I glue them.
do you have more tips just add them here.
fitting body shell on the chassis
-
- Posts: 41
- Joined: Sat 10. Aug 2013 08:39
Re: fitting body shell on the chassis
Maybe bodies produced in the future could have a little indent to set the magnets into? so they are always in the same place on every car? so bodies are easier to interchange as spares?
Re: fitting body shell on the chassis
Its a good idea I think its differ for the Porsche. But I also hade a polcorrection magnet to get them in right position.
I have miss this pictures before Thanks Keld.
Still take it easy until I get some respons for the IR time taking things.
I have miss this pictures before Thanks Keld.
Still take it easy until I get some respons for the IR time taking things.