Steel tape ?
Steel tape ?
Like a lot of you , I still keep in touch with this forum as I miss it and really had wished Magracing was feasible ! It just came to mind however, that steel tape may be the answer to the simplification of track mfg. Just lay the tape and then paint ! Just thinking out loud ! PS the production of cars would then move ahead ! Al
Re: Steel tape ?
Just a follow up ! I was referring to a magnetic tape I ran across which was 100 ft. long , 3/4 " wide and .06" thick ! Could this be used ? A very shallow groove could be routed as a support or maybe not necessary ! Also it could be cut in half as 3/4" is not necessary . If I hadn't sold my cars I would certainly give it a try ! Oh well --- Al
- HeliumFrog
- Posts: 82
- Joined: Tue 7. Oct 2014 22:28
- Contact:
Re: Steel tape ?
Yes I have tried steel tape. The width you suggest is a little too wide, and 60 thou a bit thick but I have used 5mm wide (I think it was 20 thou thick). But narrower would be better. One issue us the bends as tape is difficult to bend around a corner. The older cars also suffer shimmy on the straights so a wide band wouldn't help this. The new cars we will be releasing soon do not have this problem. We are also actively looking into standard track sections.
Here is a track I made using shim to show that it is possible.
https://www.youtube.com/watch?v=IWhJMmPehgM
Here is a track I made using shim to show that it is possible.
https://www.youtube.com/watch?v=IWhJMmPehgM