RaceID tower-grid
Posted: Fri 17. Feb 2023 14:41
I'm going to test how well it will work with RaceID IR facing up and having it register in an overhead 'bridge'. And testing the distance needed.
You wil not need to cut in the track and you will be more free to rearange the start/finish line. Or add intermediat time segments.
The legs will have room for fasteners ( glue in magnets and screws into the board ) and the Arduino Nano timing device. So you only need to have the USB cabel from there to your PC. Here is the RaceId system. https://id4u.no/butikk.html#!/magracing-raceid
You wil not need to cut in the track and you will be more free to rearange the start/finish line. Or add intermediat time segments.
The legs will have room for fasteners ( glue in magnets and screws into the board ) and the Arduino Nano timing device. So you only need to have the USB cabel from there to your PC. Here is the RaceId system. https://id4u.no/butikk.html#!/magracing-raceid