racefun test track 1 dec. 19. 2012
-
- Posts: 74
- Joined: Sat 22. Dec 2012 18:29
Re: racefun test track 1 dec. 19. 2012
I bet after a few minutes most guys will start to get the hang of it, and it will be easier after it's painted.
Great test track, shows the need for gentler curves...I'm learning by watching (and still waiting for batteries!!)
Also, I don't see any problem with the speed of the cars.
Seeing that many cars on the track is amazing
Keep up the good work
Great test track, shows the need for gentler curves...I'm learning by watching (and still waiting for batteries!!)
Also, I don't see any problem with the speed of the cars.
Seeing that many cars on the track is amazing
Keep up the good work
Re: racefun test track 1 dec. 19. 2012
thx Luf
Yes they had fun and some ordered a car at once
But since we are more than 16 guys in the club we already talked about the problem with only 16 channels, so we may have to invent 16 more (Wes this is a hint) so we don't has to change our car and controller to a free one all the time, and the mess keeping up control on which channels is free.
Yes they had fun and some ordered a car at once

But since we are more than 16 guys in the club we already talked about the problem with only 16 channels, so we may have to invent 16 more (Wes this is a hint) so we don't has to change our car and controller to a free one all the time, and the mess keeping up control on which channels is free.
/Keld
-
- Posts: 183
- Joined: Fri 21. Dec 2012 22:22
Re: racefun test track 1 dec. 19. 2012
Thanks for posting those videos Keld. I learned A LOT from watching them. I started drawing lines today and have collected materials to start gluing wire tomorrow. I am glad I saw this. I will double check all of my radius to make sure they are not too abrupt. I also think that I may wind up going for some more grip. I'll give it a try with the plastic ones first though.
MIke
MIke
Re: racefun test track 1 dec. 19. 2012
Paint is helping 
I only had some yellow and some black paint, but a little mix and I found the track color.
Only painted once, before I painted everything I removed the wire in the pit lane, only keeping a single lane in the pit.
The wire was easily removed, I glue it with contact glue in the first place, and a little gasoline added now and it was loose and free to remove.
a little test drive without steering, the car is much more drive able
last a little overview my 2 tracks, the very small MAGracing test track and behind the big slotcar track.

I only had some yellow and some black paint, but a little mix and I found the track color.
Only painted once, before I painted everything I removed the wire in the pit lane, only keeping a single lane in the pit.
The wire was easily removed, I glue it with contact glue in the first place, and a little gasoline added now and it was loose and free to remove.
a little test drive without steering, the car is much more drive able

last a little overview my 2 tracks, the very small MAGracing test track and behind the big slotcar track.
/Keld
-
- Posts: 183
- Joined: Fri 21. Dec 2012 22:22
Re: racefun test track 1 dec. 19. 2012
Keld,
After watching t first sequence of videos, the ones of you race night, I was going to ask if your group of racers were slot car guys. But after reading and watching further, I figured out that they in fact were slot car guys. My initial inclinations came from noticing how they attacked the corners pretty aggressively such as one would do with a slot car. That combined with the slipperiness due to lack of a painted surface made for a lot of spinning action! I am thinking that maybe the deeply engrained reflexes of an experienced slot car racer, gained from driving many thousands of laps using a car anchored to a groove, might serve as a disadvantage in learning this new kind of racing. Do you have any thoughts?
Mike
After watching t first sequence of videos, the ones of you race night, I was going to ask if your group of racers were slot car guys. But after reading and watching further, I figured out that they in fact were slot car guys. My initial inclinations came from noticing how they attacked the corners pretty aggressively such as one would do with a slot car. That combined with the slipperiness due to lack of a painted surface made for a lot of spinning action! I am thinking that maybe the deeply engrained reflexes of an experienced slot car racer, gained from driving many thousands of laps using a car anchored to a groove, might serve as a disadvantage in learning this new kind of racing. Do you have any thoughts?
Mike
Re: racefun test track 1 dec. 19. 2012
Hi Mike
Some of the guys race slotcar for many years, some are quite new in slotcars and 2 never raced slotcars for real.
I don't think it's a disadvantage to have great experience from slot car racing, I think we have some skills and can faster adopt the new technique, just remember that the guys tried it for the first time and not all was told how it worked, some didn't know that the guy was steering after the wire so the had no knowledge at all.
That was a test so I could see how people reacted when they didn't know anything. next time when the track have traction and the guys has a little knowledge how it works it will be much better.
Some of the guys race slotcar for many years, some are quite new in slotcars and 2 never raced slotcars for real.
I don't think it's a disadvantage to have great experience from slot car racing, I think we have some skills and can faster adopt the new technique, just remember that the guys tried it for the first time and not all was told how it worked, some didn't know that the guy was steering after the wire so the had no knowledge at all.
That was a test so I could see how people reacted when they didn't know anything. next time when the track have traction and the guys has a little knowledge how it works it will be much better.
/Keld
-
- Posts: 37
- Joined: Fri 21. Dec 2012 22:09
- Location: Long Island
Re: racefun test track 1 dec. 19. 2012
Great progress on your track!
I finished my small test track oval yesterday and turned some laps on New Year's Eve.
Without paint it was loose - but lots of potential is evident.
I used the Dremel cut off saw technique on 1/4" MDF board and it worked really well.
I should paint later today.
I have learned that the lane changes can be tricky to get just right and set up, and smooth and gradual curves work best.
I finished my small test track oval yesterday and turned some laps on New Year's Eve.
Without paint it was loose - but lots of potential is evident.
I used the Dremel cut off saw technique on 1/4" MDF board and it worked really well.
I should paint later today.
I have learned that the lane changes can be tricky to get just right and set up, and smooth and gradual curves work best.
-
- Posts: 183
- Joined: Fri 21. Dec 2012 22:22
Re: racefun test track 1 dec. 19. 2012
Just like in the real world aye? Being an oval fan myself, your oval project is intriguing me.Vintage 1/24 wrote:Great progress on your track!
I have learned that the lane changes can be tricky to get just right and set up, and smooth and gradual curves work best.
Mike
Re: racefun test track 1 dec. 19. 2012
Today tha track was painted once more, and a little wider than before.
some cars was tested with electrical tape on the wheels and what a difference that do
a setup photo:
some cars was tested with electrical tape on the wheels and what a difference that do
a setup photo:
/Keld
Re: racefun test track 1 dec. 19. 2012
Nice! I love learning from y'all's experience. Thanks for all the informative videos.
Abi
Abi