Moore testtrack

[Lasp]

During the winter I have tested different methods too build a track.

I just want too show some experiments.

I guess that the pictures talk for them selfs? If not, ask!

[matt]

like it , what about useing foam board with wire set into surface ?

[prime05]

Any issues with the cars traveling across the seams? If this works, there are some really inexpensive ping pong tables that fold up just like this. Could start a whole new trend here.

[Lasp]

Thanks for respons.
I use a soft material of 5mm and the sheets are 590mm x 790mm. Just for testing.
I use a wheel korrigated to make so place for the tread.

Roller wheel.JPG (147 KiB) Viewed 13698 times

Thats means that i get more area for glue.

Straighten the tread.JPG (118.75 KiB) Viewed 13698 times

Before I put glue on the tread I straighten it by draging it betwen my fingers, take all tension away.

lane change.JPG (197.34 KiB) Viewed 13698 times

The problem here is that I have to get another way of shaping the lane changing.

Moore about that later says Lasp

[matt]

been thinking about trying this , foam sign board , trackline with simple knife would need a stop on knife for depth then glue wire and paint or maybe vinyl on top , even photo printed vinyl