1/24 Talbot-LagoMagracer
-
rex craemer
- Posts: 456
- Joined: Thu 4. Dec 2014 09:53
- Location: cologne
-
rex craemer
- Posts: 456
- Joined: Thu 4. Dec 2014 09:53
- Location: cologne
-
rex craemer
- Posts: 456
- Joined: Thu 4. Dec 2014 09:53
- Location: cologne
Re: 1/24 Talbot-LagoMagracer
Last edited by rex craemer on Wed 9. Mar 2016 06:21, edited 1 time in total.
-
rex craemer
- Posts: 456
- Joined: Thu 4. Dec 2014 09:53
- Location: cologne
-
rex craemer
- Posts: 456
- Joined: Thu 4. Dec 2014 09:53
- Location: cologne
-
rex craemer
- Posts: 456
- Joined: Thu 4. Dec 2014 09:53
- Location: cologne
-
rex craemer
- Posts: 456
- Joined: Thu 4. Dec 2014 09:53
- Location: cologne
Re: 1/24 Talbot-LagoMagracer
by the way, my lapcounting is working. next will be the paintjob and the details. runs like hell with this big wheels. video will follow, so long markus
-
rex craemer
- Posts: 456
- Joined: Thu 4. Dec 2014 09:53
- Location: cologne
-
rex craemer
- Posts: 456
- Joined: Thu 4. Dec 2014 09:53
- Location: cologne
Re: 1/24 Talbot-LagoMagracer
its only the chassie, it works good, a little fine trimming is needed. and as wes said, the grip of the original plasticwheels is good, so the driving is like the real old car, but the noise is it too.
Re: 1/24 Talbot-LagoMagracer
Well done Marcus and quick work! I only just finished my Alfa today. Surprised to hear that the lap counting works from such a height. I am only running one motor but the spur gear is larger. You can buy packets of 50 or more assorted gears quite easily. I think the gears are Module 0.5mm. Obviously you don't have a problem running 2 motors from the speed controller.